Palapas are open-sided structures like tiki huts. You can learn how to build a palapa in your garden or backyard to create the setting and ambiance of a tropical location. Palapas come in various sizes and shapes and bear a resemblance to giant thatched umbrellas with one or two poles supporting the roof structure. The thatch is waterproof and fire-resistant. In most situations, the thatch also allows for air to flow through the roof so you can stay cool on a hot summer day. In this article, we will learn how to build a palapa.
In order to learn how to build a palapa, you first need to select a suitable location. Choose an area that is unobstructed by power lines or buildings. Next, cut the top of your post using a miter saw so that you have eight sides at the angle of the pitch you want your roof to be. For example, if you want the roof to pitch at 25 degrees, cut your boards at a 25 degree angle.
The next step in learning how to build a palapa is to determine the center of the location and dig out a hole of 3 feet in depth slightly larger than your 6 by 6 inch, 11 foot post. Place the post into the hole and fill the hole with concrete. With the help of a level, make sure your past is straight.
After this, cut your pre-treated 2 by 2 boards into 4 foot sections in order to learn how to build a palapa. You will need eight boards for the frame. Cut them at the angle you want the rood of your palapas to be and secure these boards to your main post.
In order to understand how to build a palapa, cut your support boards and attach them to the bottom of the framing boards and onto the pole using screws. Build your cross beams from 2 by 2 wooden boards. Determine the distance between the frame boards and add 2 inches. Cut the boards and attach them to the top of the framing boards with the help of screws. Continue doing this until there is a support between all eight of your framing panels.
The next step to learn how to build a palapa is to install the thatch. Let the palm frond hang over the frame to the level you desire, and then fasten the frond onto the second crossbar from the bottom of the frame. Attach the next frond in such a way that it overlaps the first one on one side. Continue until the first layers of palm fronds have been attached. The final step to learn how to build a palapa is to attach the remaining layers of palm fronds until the roof is complete.
Thatched huts provide the classic tropical appearance to the roof or walls of an authentic tiki hut. Comprising of dried palm fronds, thatched huts are not only used for aesthetic reasons, but if crafted and installed correctly, thatched huts can also serve the purpose of a waterproof roof.
Several different types of palm fronds can be used to thatch a hut. The best varieties of palms for thatched huts are the ones that have leaves similar to a queen, king or kentia palm. These palms all have fronds with singular leaves that are elongated and finger-like coming off the main leaf stalk. Thatched huts are typically made of palm fronds, brush or other local grasses and reeds. Thatched huts were originally constructed in Europe and are still prevalent in the more rural areas of some European countries. Thatched huts are also commonly found in tropical climates such as Hawaii, the Caribbean and Africa, but thatched huts are also well suited to cooler climatic conditions. Here are instructions to build one.
Firstly, assemble the palm fronds, reeds or grasses that are no less than 2 feet long. Bunch them together into 1 to 2 inch bundles. Moisten the dried palm leaves or brush them until they are slightly damp with the purpose of making it more flexible. Lay a bundle vertically against the base of wall framing. Wrap 1/4 inch of the top of a bundle or palm leaf around the lowest horizontal pole. Coil a few strands around the top to fix it firmly to the post. Push it over until it rests firmly in place.
Repeat the previous step and ensure that each bundle is tightly pushed against the next. Overlap bundles as you move up the walls. Continue doing so until the entire roof of the thatched huts is covered. Secure the thatch to the base of the roof poles just like you covered the walls, making sure that there are no openings and each succeeding row overlaps the other by no less than 1 inch.
Once you reach the top of the thatched huts, place bundles or leaves to completely coat the central peak. Stitch the bundles onto underlying layers by weaving twine or vine in and out among the bundles. You could also extend the bundles 4 to 6 inches above the peak and fasten tightly. You should now have your appealing, water-resistant thatched hut.